Auto Specialties recommends these pulleys be installed by a qualified mechanic.

1. USING AIR IMPACT WRENCH, REMOVE ALTERNATOR NUT.

2. REMOVE BELT AND HARMONIC BALANCER CRANK PULLEY. NOTE DIRECTION OF CAST ARROW. (NOTING DIRECTION MAKES FOR FASTER INSTALLATION) REMOVE ALTERNATOR PULLEY AND SPACER.

3. INSTALL UNDERDRIVE BALANCER CRANK PULLEY WITH MARK IN SAME LOCATION AS CAST ARROW. CRANK PULLEY WILL ONLY GO ON ONE WAY. FORCING PULLEY ON WILL DAMAGE BOLT HOLES. USING AIR IMPACT WRENCH, INSTALL NEW ALTERNATOR PULLEY.

4. INSTALL GOODYEAR BELT 4060610 WITH PART NO. 945100 AND GATES BELT K060615 WITH PART NO. 945103.

5. START UP ENGINE AND INSPECT PULEYS, TO INSURE THAT PULLEYS DO NOT WOBBLE.