ASP recommends that this installation be done by an experienced mechanic.

1. Remove existing belt and crankshaft pulley.

2. Install new pulley. Use Loctite Thread Lock #242, or equivalent to secure bolts.

3. Install Gates belt (or equivalent) as follows (with a/c): #541800
2.8 Truck K060984
87 2.8 Camaro/Firebird
(no air pump) K060905
87 2.8 Camaro/Firebird
(with air pump) K060945
88-89 2.8 Camaro/Firebird
(no air pump) K060910
88-89 2.8 Camaro/Firebird
(with air pump) K060950
90-92 3.1 Camaro/Firebird
K060980
93-95 3.4 Camaro/Firebird
K060755

#541801
2.8 Truck K060988
87 2.8 Camaro/Firebird
(no air pump) K060910
87 2.8 Camaro/Firebird
(with air pump) K060950
88-89 2.8 Camaro/Firebird
(no air pump) K060915
88-89 2.8 Camaro/Firebird
(with air pump) K060956
90-92 3.1 Camaro/Firebird
K060980
93-95 3.4 Camaro/Firebird
K060760

4. Insure adjustment marks on tensioner are within the limit marks.