Auto Specialties recommends that these pulleys be installed by a qualified mechanic.

1. REMOVE HEX BOLT IN BLOWER SHAFT WITH AIR IMPACT WRENCH.

2. RELAX BELT TENSION AND REMOVE PULLEY. A THREE JAW PULLER MAYBE REQUIRED TO REMOVE PULLEY.

3. INSTALL OVERDRIVE PULLEY ONTO SHAFT INSURING SLOT IN PULLEY ALIGNS WITH KEY IN SHAFT.

4. REINSTALL BOLT. PULLEY WILL SEAT ON SHAFT AS BOLT IS TIGHTENED.

5. REINSTALL FACTORY BELT. IF NEW BELT IS REQUIRED INSTALL GATES BELT K080390.